Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Simple Overscan Display
Message-ID: <664@cbmger.UUCP>
Date: 21 Dec 90 09:22:10 GMT
References: <4189@mindlink.UUCP>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 16

In article <4189@mindlink.UUCP> a976@mindlink.UUCP (Ron Tarrant) writes:
>
>I took a look at the code for MultiPlot and unfortunately it doesn't do the
>kind of thing I'm trying to do. Like you said, it will create an overscan
>screen IF the WB screen is overscan (set by MoreRows, et al). What I want to do
>is create an overscan display from scratch so that the end product doesn't
>depend on MoreRows or something else to set up the overscan screen.
>
>Is there an OFFICIAL CBM  way of doing this?

You must (upgrade to/wait for) 2.0 where there is an OFFICIAL way for
doing overscan.

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk