Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!petunia!news
From: jgieske@polyslo.CalPoly.EDU (John Erik Gieske)
Newsgroups: comp.sys.apple2
Subject: Point-to-Point
Message-ID: <276cbd4a.21bd@petunia.CalPoly.EDU>
Date: 17 Dec 90 12:42:50 GMT
Reply-To: jgieske@polyslo.CalPoly.EDU (John Erik Gieske)
Distribution: na
Organization: Cal Poly State Univ,CSC Dept,San Luis Obispo,CA 93407
Lines: 47




Help!  

Everytime I do something vt100 dependent, PTP changes its emulation to vt52!
Currently, I am connected to my school's Pyramid (8N1) through csunet (x25) from
San Jose State's host (7E1).  PTP always worked when I called in directly.
Can anybody give me some suggestions, or is this just some hardware 
incompatabilities ?

I have Point-to-Point, version 4.0.   Is this the most recent version?  I would
have addressed this problem directly to Beagle Brothers, but their pro-beagle
number is at school.

Thanks...

John
jgieske@polyslo.CalPoly.EDU

Newsgroups: Comp.sys.apple2
Subject: Point-to-Point
Expires: 
References: 
Sender: jgieske@polyslo.CalPoly.EDU 
Reply-To: jgieske@polyslo.CalPoly.EDU (John Erik Gieske)
Followup-To: 
Distribution: na
Organization: Cal Poly State Univ,CSC Dept,San Luis Obispo,CA 93407
Keywords: 

Help!  

Everytime I do something vt100 dependent, PTP changes its emulation to vt52!
Currently, I am connected to my school's Pyramid (8N1) through csunet (x25) from
San Jose State's host (7E1).  PTP always worked when I called in directly.
Can anybody give me some suggestions, or is this just some hardware 
incompatabilities ?

I have Point-to-Point, version 4.0.   Is this the most recent version?  I would
have addressed this problem directly to Beagle Brothers, but their pro-beagle
number is at school.

Thanks...

John
jgieske@polyslo.CalPoly.EDU