Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!unido!laura!tommy!klute
From: klute@tommy.informatik.uni-dortmund.de (Rainer Klute)
Newsgroups: comp.sys.atari.st.tech
Subject: MTools
Message-ID: <2887@laura.UUCP>
Date: 21 Dec 90 13:33:09 GMT
Sender: news@laura.UUCP
Reply-To: klute@tommy.informatik.uni-dortmund.de (Rainer Klute)
Organization: University of Dortmund, Germany
Lines: 18

Does anybody have experience with MTools?

I would like to write files to a floppy on my Sun Sparcstation using MTools
and read them with my Atari ST. However, on the ST I can read only the
first one or two sectors, then the last portion of the file is repeated,
then a read error occurs.

On a PC reading the file is no problem. (No, I did not touch the PC myself
- I had someone doing that for me :-).) Consequently MTools works ok but
something is wrong at the ST side.

Any hints?

-- 
  Dipl.-Inform. Rainer Klute      klute@irb.informatik.uni-dortmund.de
  Univ. Dortmund, IRB             klute@unido.uucp, klute@unido.bitnet
  Postfach 500500         |)|/    Tel.: +49 231 755-4663
D-4600 Dortmund 50        |\|\    Fax : +49 231 755-2386