Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!usc!ucsd!ogicse!clark!pro-freedom.cts.com!pip
From: pip@pro-freedom.cts.com (David Pipgras)
Newsgroups: comp.sys.mac.misc
Subject: Re: WANTED: DeskWriter Help! (too)
Message-ID: <1990Dec19.232339.15596@clark.edu>
Date: 19 Dec 90 23:16:05 GMT
Sender: usenet@clark.edu
Organization: Apple*Van - Apple Users Group of Vancouver, WA [206/253-9389]
Lines: 21

In-Reply-To: message from marc@Apple.COM

The deskwriter software should work. When you turn the printer on, it opens
and closes to clear the paper path. When you set it up, make sure it is on,
then set it up, and print.  It could be that by accident you hit the select
switch and took it off line? try that. If it says it is not responding, then
try the select switch, and re-print it.

Other things to try if the above does not work, is to get a new copy of the
software (version 2.00 in US) from a local dealer, or call the dealer and have
them check for a loose keypad, or PC board connections.

Dave

--------------------------------------------------------
          "pIch vIghajbe'" -- Worf, Star Trek - The Next Generation
--------------------------------------------------------

UUCP: .. !crash!pro-freedom!pip
ARPA: crash!pro-freedom!pip@nosc.mil
INET: pip@pro-freedom.cts.com