Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!wb3ffv!ka3ovk!irscscm!jkossoy
From: jkossoy@irscscm.UUCP (Jeff Kossoy)
Newsgroups: comp.sys.novell
Subject: Problems getting Logitech mice to work on our LAN (Repost)
Message-ID: <1990Dec17.154533.9187@irscscm.UUCP>
Date: 17 Dec 90 15:45:33 GMT
Reply-To: jkossoy@irscscm.UUCP (Jeff Kossoy)
Organization: Internal Revenue Service, Washington, DC
Lines: 37

HELP!!!!!!HELP!!!!!!HELP!!!!!!HELP!!!!!!HELP!!!!!!HELP!!!!!! HELP!!!!!!

Sorry for the repost, but I forgot to give you my Internet address, and also
a few things that I have already tried.

Now that I have your attention, My office just had a Novell LAN installed,
and we are having problems getting our mice to work (we are still learning how
to use it :)).

Our LAN consists of:
  Cabletron Ethernet boards in all connected PC's
  Novell Adv. Netware 286 V2.15 Rev. C
  Novell Shell Driver v1.03.00

The mice are all Logitech bus mice.

The PC's vary. They include AT&T, NCR, IBM-AT, Wyse PC's.

The things that I have done have been to change the interrupt on both the 
mouse board and the ethernet card (including the software to run the card).
I did check to see if the mouse board was ok by removing the ethernet card.

Any suggestions or solutions if you've had this problem also, please e-mail
me direct, as I don't get a chance to read this newsgroup as much as I should.
If a solution is found or not found as the case may be, I will post a summary
with all those who contributed to my offices learning.

                        Jeff Kossoy

My UUCP address is: jkossoy@irscscm.UUCP
My Internet address is: ...!uunet!media!ka3vk!irscscm!jkossoy

-- 
-------------------------------------------------------------------
| These are my opinions only, and not those of my employer.       |
|  Jeff Kossoy                                                    |
-------------------------------------------------------------------