Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!samsung!sol.ctr.columbia.edu!cunixf.cc.columbia.edu!lamont!dale From: dale@lamont.ldgo.columbia.edu (dale chayes) Newsgroups: comp.sys.sgi Subject: Re: External clock for P-I serial port? Summary: Externaly clocked serial I/O is not time-of-day Message-ID: <3032@lamont.ldgo.columbia.edu> Date: 18 Dec 90 22:54:41 GMT References: <78445@sgi.sgi.com> Distribution: comp Organization: Lamont-Doherty Geological Observatory N.Y. Lines: 49 In article <78445@sgi.sgi.com>, vjs@rhyolite.wpd.sgi.com (Vernon Schryver) writes: > > > I am wondering why you need an external clock? gettimeofday() provides > > time in micro-second. > . lines deleted . > > > Perhaps the originial question concerned an alternative to timed, Actually, here is the original posting: From: chrisa@beldar.ma30.bull.com (Chris Anderson) ... Subject: External clock for P-I serial port? Message-ID: Date: 13 Dec 90 19:55:07 GMT Is it possible to provide an external clock for either or both of the serial ports on the personal Iris? The manuals indicate that ioctl can set an external clock mode, but the signal is undocumented. Is the clock signal a spare pin on the D connector, and if so, what should drive it? Thanks for any info. ---Chris A. It has nothing to do with time-of-day. I read this as a requst for information about SYNCHRONOUS serial I/O through the supported serial ports. In fact, Vernon, you answered the original question on December 16th with a clear NO, and a reminder that the IOCTL EXTA/B are for two additional baud rates. I will be the first to thank you for helping us (the net community interested in SIG issues) but converting a discussion about serial (async or not) i/o into a timed/ntp/GOES time-of-day discussion to be a bit of a devolution. Dale ============= -- Dale Chayes Lamont-Doherty Geological Observatory of Columbia University Route 9W, Palisades, N.Y. 10964 dale@lamont.ldgo.columbia.edu voice: (914) 359-2900 extension 434 fax: (914) 359-6817