Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!rutgers!att!pacbell.com!ucsd!ogicse!zephyr.ens.tek.com!tektronix!upvax!stevewa
From: stevewa@upvax.UUCP (Steve Ward)
Newsgroups: comp.unix.sysv386
Subject: Re: Can ISC 2.0.2 support 16mb ram
Keywords: 16mb and ISC 2.0.2
Message-ID: <1146@upvax.UUCP>
Date: 20 Dec 90 00:49:41 GMT
References: <186@epca.UUCP> <1990Dec19.134222.29976@virtech.uucp>
Reply-To: stevewa@upvax.UUCP (Steve Ward)
Distribution: usa
Organization: University of Portland, Portland, OR
Lines: 23

In article <1990Dec19.134222.29976@virtech.uucp> cpcahil@virtech.UUCP (Conor P. Cahill) writes:
|In article <186@epca.UUCP> ellis@epca.UUCP (Ellis Carter) writes:
|>I would like to know if ISC 2.0.2 will support 16mb ram.  I tried it in
|>a 386 25mhz and it would reboot after it began to boot from the HD.  About
|>that time is when it puts the information of how much  memory is in the 
|>computer and how much is usable.  
|
|The problem you are running into is probably one of the following:
|
|	1. a MB problem
|	2. a MB configuration problem
|	3. a conflict with a card on the bus

Here's one I've seen...
It could also be the printer.  ISC will continually reboot if your printer
is connected to the computer but not turned on.  Anyone have any idea why?

Steve
-- 
| Steve Ward Jr. appears courtesy of       |            stevewa@upvax.UUCP    |
| Univ. of Portland, Portland, OR          |         !tektronix!upvax!stevewa |
| (insert disclaimer here)                 |  upvax!stevewa@tektronix.TEK.COM |
| --If all else fails, try:      tektronix.TEK.COM!upvax!stevewa@uunet.uu.net |