Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!news.funet.fi!uwasa.fi!ts
From: ts@uwasa.fi (Timo Salmi)
Newsgroups: comp.binaries.ibm.pc.d
Subject: Re: Trouble with Telix Kermit
Keywords: Procomm, Telix
Message-ID: <1990Dec31.084523.17821@uwasa.fi>
Date: 31 Dec 90 08:45:23 GMT
References: <3129@mentor.cc.purdue.edu>
Organization: University of Vaasa
Lines: 29

In article <3129@mentor.cc.purdue.edu> nester@pop.stat.purdue.edu (Darryl K. Nester) writes:
>fairly serious problem -- I can't get Telix to do Kermit uploads or downloads.
:
>Please understand -- if I never did another Kermit transfer in my entire
:
>Has anyone ever done a Kermit transfer with Telix?  (Probably not, unless
>you HAD to :-) 
:
>I'd appreciate any advice or suggestions.  Thanks. 
:

The very first thing for you to do is to narrow down your problem. 
For example, do the obvious, that is try with another program's
kermit.  Try MsKermit and Procomm.  If you don't have MsKermit you
can get it from uwasa.fi (/pc/pd2 directory) or simtel20.  If you
need kermit advice, get /pc/ts/tskerm24.arc.  If you need Procomm
advice, get /pc/ts/tspfon29.arc.  After the experiments you should
know whether your problem is specific to Telix.  If it is see what
settings you have different from what you have with the working
transfer.  This is the way to proceed.  Isolate the problem step by
step. 

BTW, I just re-tested that Telix kermit transfer does work on my
configuration, so it is not that Telix kermit can't be made to work. 

...................................................................
Prof. Timo Salmi        (Moderating at anon. ftp site 128.214.12.3)
School of Business Studies, University of Vaasa, SF-65101, Finland
Internet: ts@chyde.uwasa.fi Funet: gado::salmi Bitnet: salmi@finfun