Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!samsung!uunet!mcsun!unido!ira.uka.de!sun1.ruf.uni-freiburg.de!horlache
From: horlache@sun1.ruf.uni-freiburg.de (Ullrich Horlacher)
Newsgroups: comp.dcom.modems
Subject: EICON x.25 PC-card question
Message-ID: <1990Dec22.002405.29247@sun1.ruf.uni-freiburg.de>
Date: 22 Dec 90 00:24:05 GMT
Distribution: comp
Organization: Rechenzentrum der Universitaet Freiburg, Deutschland
Lines: 29

I post this for a friend without news-access, please respond via e-mail
directly to him and not to me - thanx.



--------------------------------------------------------------

I have got a PC 386SX with an EICON x25 Card and direct
connection to the German Packet-Switched Network, Datex-P.
Until now I have used Access/PC x25, it works fine, but
does not support any protocols for file transfer like kermit
or zmodem. To use other communication programs which do sup-
port those protocols, like Xtalk/Windows, I bought the
'3rd Party Emulation Support' Software from EICON,
which redirects output which was destinated to COM1/COM2 to
the EICON Card. It also emulates a PAD. There are 3 drivers 
catching output which comes through int 14h, int 21h and
to the 8250 Chip.
I tried all 3, but didn't make any Communacation Programs
work, and I tested several. 
I think the COM2 was not even redirected to the Card!!!
Does anybody have the same card/Emulation and can help me?
Thanks you very much!

Please reply to machac@darkside.com for the fastest way via
email

--------------------------------------------------------------------------