Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!ucselx!coxc0011
From: coxc0011@ucselx.sdsu.edu (David Tse)
Newsgroups: comp.sys.amiga
Subject: Re: A500 -> NEC multisync II
Message-ID: <1990Dec23.133015.11212@ucselx.sdsu.edu>
Date: 23 Dec 90 13:30:15 GMT
References: <27516.276e1a99@kuhub.cc.ukans.edu>
Organization: San Diego State University Computing Services
Lines: 23

2flnoffend@kuhub.cc.ukans.edu writes:

>I need to hook up an NEC multisync II to an A500, I'd appreciate any help
>that you could give me.

>Thanks!

If it's a Nec 2A, it won't go down to 15.75kHz of horizontal freq. if
you read the spec. sheet. A Nec 3D, or old 3A will do.

The cable is different, has diff. pin out, so you need a special cable.

good luck,
David

ps. I'm looking for a good monitor for the A3000, anyone suggests one
which handles the overscan properly? (display on whole screen)

-- 
/*****************************************************************************/
/*    David Tse      Internet: coxc0011@ucselx.sdsu.edu (expire 12/31/90)    */
/*                  U.S. Mail: P.O. Box 15634, San Diego, CA 92175-0634, USA */
/*               Organisation: San Diego State University, California, USA   */