Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!ucsd!nosc!crash!pro-graphics.cts.com!bobl
From: bobl@pro-graphics.cts.com (Bob Lindabury, SysAdmin)
Newsgroups: comp.sys.amiga
Subject: Re: UUCP Summary
Message-ID: <6534@crash.cts.com>
Date: 26 Dec 90 00:56:05 GMT
Sender: root@crash.cts.com
Lines: 21

In-Reply-To: message from jason@cbmami.UUCP

I too have problems posting news with Dnews.  It doesn't seem to post.

As for Dmail, if you want to save a letter, you use the P command for
preserve.  If you don't preserve the mail, it gets marked as read and
automatically deleted.  I have no problems using UUCP with my Hayes Ultra 96
at 9600 bps V.32.   I regularly dial out at 38400 and 19200..I have 9600
connects with no problem.  Only problem I have is incomming calls that don't
seem to drop the port speed correctly.  I show a lower speed connect on
the modem and in the log but the dialing in side sees garbage that must have
to do with incorrect port speeds.

-- Bob
______ Pro-Graphics BBS  "It's better than a sharp stick in the eye!" ________

    UUCP: crash!pro-graphics!bobl         |         Pro-Graphics: 908/469-0049
ARPA/DDN: pro-graphics!bobl@nosc.mil      |       America Online: Graphics3d
Internet: bobl@pro-graphics.cts.com       |           CompuServe: RIP
_________                                                          ___________
          Raven Enterprises  25 Raven Avenue  Piscataway, NJ 08854