Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!faatcrl!jprad From: jprad@faatcrl.UUCP (Jack Radigan) Newsgroups: comp.sys.amiga Subject: Re: JR-Comm VT100 emulation Message-ID: <654@faatcrl.UUCP> Date: 2 Jan 91 00:31:05 GMT References: <600@caslon.cs.arizona.edu> <37397@cup.portal.com> <647@faatcrl.UUCP> <37439@cup.portal.com> Organization: FAA Technical Center, Atlantic City NJ Lines: 31 thad@cup.portal.com (Thad P Floryan) writes: >First, I'm happy to hear that Dave P. Schaumann solved his difficulty with >JR-Comm V1.01, and am pleasantly surprised to hear that Jack Radigan enhanced >the "base" D.J.James' COMM program so well. I really wish you'd do some investgating before you post such erroneous information. JR-Comm is completely original, it is not "based" on any previous work. I wouldn't be comfortable asking for a registration fee if it was. >As far as "VT100" compatibilty goes, if a program doesn't 100% pass the Per >Lindberg "vttest" VT100 validation suite, then a program is NOT compatible. Have *you* tested JR-Comm with it for yourself? I would appreciate either the source to this program or your results so that I can fix any remaining problems that may (or may not) exist. >At my office we have REAL DEC VT100, VT220 and VT240 terminals, and also >Datamedia DT80 and Falco TS1 clones. And we have IBM-PCs, Macs and Amigas. >Nothing on the Macs or IBM-PCs will properly emulate a VT100; NOTHING. >Handshake on the Amiga does, and so apparently does A-Talk-III and now, >presumably, JR-Comm. But I'll reserve judgment on those last two until I >*see* them do 80 and 132 columns along with double wide and double-wide/-high >characters and pass every part of the Per Lindberg validation suite. Double width/height is there. 132 isn't, by me directly, but if you add the proper fonts it would work. I can't see the use for 132 columns with the Amiga since you need 660 pixels at a minimum for 5 pixel wide characters with only 4 allowed for the character itself since one is required for spacing. -jack-