Path: utzoo!mnetor!tmsoft!becker!bdb
From: bdb@becker.UUCP (Bruce D. Becker)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: A1300+A3000:  will it work?
Message-ID: <62186@becker.UUCP>
Date: 24 Dec 90 17:43:23 GMT
References: <9960@darkstar.ucsc.edu> <19620001@hp-lsd.COS.HP.COM>
Organization: G. T. S., Toronto, Ontario, Canada
Lines: 21

In article <19620001@hp-lsd.COS.HP.COM> davem@hp-lsd.COS.HP.COM (Dave K. Martin) writes:
|I've tried connecting my A1300 genlock to my 2000 using an extension cable, 
|but the 2000 will not boot with the A1300 connected.  When I put the A1300
|back on my 1000, it works fine.  
|
|The Hardware Reference Manual shows that the 1000 and the 2000 video ports are
|identical but that the 500 has -12 volts on pin 21 where the 1000 & 2000's
|have -5 volts.

	The A1300 works just as badly on an A2000 as
	on an A1000 (8^), but not with an extension cable.

	It sure looks funny sticking out the side
	like that however...

Cheers,
-- 
  ,u,	 Bruce Becker	Toronto, Ontario
a /i/	 Internet: bdb@becker.UUCP, bruce@gpu.utcs.toronto.edu
 `\o\-e	 UUCP: ...!uunet!mnetor!becker!bdb
 _< /_	 "Que es mas macho: Gorbachev, o Shevardnadze?" - lala