Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!wuarchive!mit-eddie!uw-beaver!cornell!rochester!kodak!uupsi!sunic!news.funet.fi!cc.tut.fi!tut!mt87692 From: mt87692@tut.fi (Mikko Tsokkinen) Newsgroups: comp.sys.amiga.tech Subject: Eric Graham's compression technique(IFF-ANHD) Message-ID: Date: 22 Dec 90 14:52:43 GMT Sender: news@cc.tut.fi (USENET News System) Distribution: comp Organization: Tampere University of Technology Lines: 36 Hello, I have problems with Sculpt animations. The animation player I have (movie1.3) is the only one I know allowing me to view sculpt animations however it crashes in my machine too often (if working at all). It seems to have problems especially with overscan workbench. I tried also sculpt 4D to show/decode the animations but it worked just as bad. Browsing thru Includes&Autodocs leads to: ANHD chunk Compression method 74 (ascii J) reserved for Eric Graham's compression technique (details to be released LATER ) Now I would like ask when is this later because I would really like to have the specs so that I could make a player/decoder for 1, 2, 3 ,4 ,5 and J compressing. If you have the specs and/or a player which works I would really appreciate if you could send them/it to me. And yes... Merry Christmas ! MIT Hardware: Pal/Ntsc B2K rev6.2, Kick1.3, 1M/.5M chip, 2M/2.5M fast, MC68010 2 internal 3.5" drives, 2090A, Wordsync, 40M(st506), 105M(scsi) -- /// AMIGA /// Pal A2k rev6.2, Kick1.3, 1MB chip, 2x3.5"floppy, 2090A & 40M HD. \\\ /// \\X// MIT