Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!usc!ucsd!nosc!crash!orbit!pnet51!koleman
From: koleman@pnet51.orb.mn.org (Kurt Koller)
Newsgroups: comp.sys.amiga.tech
Subject: A3000, PAL
Message-ID: <3698@orbit.cts.com>
Date: 25 Dec 90 09:25:06 GMT
Sender: news@orbit.cts.com
Organization: People-Net [pnet51], Minneapolis, MN.
Lines: 18

Well, I am planning on dumping my 2500/30 and going to a 3000.  I have a
question.
 
I have a PAL jumpered 2500, and it comes up in PAL and all the programs I run
come up in PAL.  Under 2.0, if I have the machine jumpered for NTSC, and I
have Prefs set to PAL, any programs I run come up in NTSC.  When you switch
between screens, it is annoying, not to mention 56lines shorter than I an used
to in Non-interlace.  I want to keep this extra resolution.
 
What happens on the 3000?  Do all the apps open to NTSC dimensions if I have
prefs set to PAL?  And if so, can I jumper the 3000 to be PAL?
 
Thank you.
Koleman

Kurt "Koleman" Koller
UUCP: {crash tcnet}!orbit!pnet51!koleman
INET: koleman@pnet51.orb.mn.org