Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!mcsun!unido!laura!tommy!klute From: klute@tommy.informatik.uni-dortmund.de (Rainer Klute) Newsgroups: comp.sys.atari.st.tech Subject: Re: MTools Message-ID: <2890@laura.UUCP> Date: 27 Dec 90 09:40:44 GMT References: <2887@laura.UUCP> Sender: news@laura.UUCP Reply-To: klute@tommy.informatik.uni-dortmund.de (Rainer Klute) Organization: University of Dortmund, Germany Lines: 16 In article , ridderbusch.pad@nixdorf.com (Frank Ridderbusch, PXD-S4) writes: |> I am also using Mtools on my local un*x box and had the same problems |> that you mention (My Mtools was an older version, not 2.0). Further |> investigation showed, that Mtools only wrote and updated one File |> Allocation Table (FAT). While PC's have not trouble with this, the ST |> does. My sources of Mtools had a define in it to allow writing of both |> FAT's. After recompiling the Mtools worked okay. The define's name is DUP_FAT. Just compile init.c with -DDUP_FAT. -- Dipl.-Inform. Rainer Klute klute@irb.informatik.uni-dortmund.de Univ. Dortmund, IRB klute@unido.uucp, klute@unido.bitnet Postfach 500500 |)|/ Tel.: +49 231 755-4663 D-4600 Dortmund 50 |\|\ Fax : +49 231 755-2386