Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!kb2ear!overlf!emanuele
From: emanuele@overlf.UUCP (Mark A. Emanuele)
Newsgroups: comp.sys.att
Subject: Re: SOTA 386i on AT&T PC-6300
Keywords: Does it work?
Message-ID: <1848@overlf.UUCP>
Date: 27 Dec 90 01:57:23 GMT
References: <1990Dec24.230350.9161@cbnewsc.att.com>
Organization: Overleaf, Inc.
Lines: 28

In article <1990Dec24.230350.9161@cbnewsc.att.com>, psfales@cbnewsc.att.com (Peter Fales) writes:
> 
> Does anyone have any experience with the the SOTA 386i accelerator card,
> especially in the AT&T PC-6300?  (The 6300 is an XT compatible 8086 
> based machine).
> 
> Will all my 
> add-on cards like EMS still work?




I have had one in my 6300 for about a year now, and have had NO problems.
You can use your EMS board, but ONLY in REAL (DOS) mode. The Protected 
mode is not yet supported.






Hope this helps.

-- 
Mark A. Emanuele
V.P. Engineering  Overleaf, Inc.
500 Route 10 Ledgewood, NJ 07852-9639         attmail!overlf!emanuele
(201) 927-3785 Voice   (201) 927-5781 fax     emanuele@overlf.UUCP