Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!wuarchive!bcm!soma!concurrent-request
From: steve@eros.ame.arizona.edu (Steve Cannon)
Newsgroups: comp.sys.concurrent
Subject: Help with disk partition problem?
Message-ID: <3367@gazette.bcm.tmc.edu>
Date: 26 Dec 90 15:56:27 GMT
Sender: usenet@bcm.tmc.edu
Lines: 22
Approved: concurrent@soma.neusc.bcm.tmc.edu
Nntp-Posting-Host: cortex.neusc.bcm.tmc.edu

I have a Masscomp 5520 running RTU 4.1A with a Fujitsu Eagle disk
that has 2 partitions - da0 and da0b. Occasionally when df is
executed it comes back with a message something like "... unable
to access da0" and the regular info for da0b. The only way I've
found to clear up this problem is to reboot the system. Two 
questions:

   1. Any ideas as to why I am getting this message?

   2. Is there another way to correct this problem (short of
      rebooting the system)?

Thanks,

Steve Cannon <X> UUCP: ...{uunet,allegra,cmc12,hao!noao,att}!arizona!eros!steve
AME Dept.    <XXXXXXXXXX> Internet: steve@eros.ame.arizona.edu
University of Arizona <X> Bitnet: scannon@arizrvax
Tucson, AZ 85721      <X> Phone: +1 602 621-6091

Articles to: concurrent@soma.bcm.tmc.edu or uunet!soma.bcm.tmc.edu!concurrent
Administrative stuff: concurrent-request@soma.bcm.tmc.edu
Stan Barber, Moderator