Xref: utzoo comp.sys.hp:7251 comp.unix.sysv386:3303
Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!ukc!mucs!logitek!grep!vic
From: vic@grep.co.uk (Victor Gavin)
Newsgroups: comp.sys.hp,comp.unix.sysv386
Subject: Can't get SCO to use Adaptec SCSI card with HP Vectra 486 (EISA)
Keywords: SCO Adaptec 1542B Hewlett-Packard HP Vectra 486 EISA
Message-ID: <1990Dec21.140959.3253@grep.co.uk>
Date: 21 Dec 90 14:09:59 GMT
Reply-To: vic@grep.uucp.co.uk (Victor Gavin)
Organization: Grep Limited, LEEDS, UK
Lines: 23


Hi,

Does anyone know of any problems using an Adaptec 1542B SCSI controller card on
an HP Vectra 486 (EISA).


I've been trying for about a week to configure ODT 1.0 to recognize a DAT drive
connected to this card. The best I've managed is to hang processes in the
kernel when accessing the tape device file.


Does anyone know of problems with this combination ?

(I suspect HP's implementation of EISA, but HP won't talk to me so I can't find
out)

			vic

PS The DAT drive is a wangDAT, if that makes a difference
--
Victor Gavin <vic@grep.co.uk||vic@grep.uucp||..!ukc!grep!vic||+44 532 500303>
Grep Limited, Kirkfields Business Centre, Kirk Lane, Leeds, UK, LS19 7LX