Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!uunet!samsung!olivea!mintaka!ogicse!pdxgate!eecs!berggren
From: berggren@eecs.cs.pdx.edu (Eric Berggren)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: XMS to EMS driver wanted
Message-ID: <999@pdxgate.UUCP>
Date: 28 Dec 90 09:21:50 GMT
Sender: news@pdxgate.UUCP
Lines: 15


  I have a second-hand 2-meg extended memory board (of which I fully loaded).
Many of my existing software includes XMS support, but, unfortunately, many
others still thrive in the archaic world of good ole' EMS.
  I would like a driver (commercial or PD) to be able to automatically 
address part of my extended memory in to UMB as conventional LIM EMS 3.2
(or even 4.0, if possible) for my 286 machine. Most of the drivers I have
seen, does 4.0 requiring a 386 (>sigh<). Any help would be appreciated.
Thanx.


==============================================================================

     "Round and round the while() loop goes;
           Whether it stops," Turing says, "nobody knows."