Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!wuarchive!uunet!mcsun!hp4nl!phigate!philica!adrie From: adrie@philica.ica.philips.nl (Adrie Koolen) Newsgroups: comp.sys.ibm.pc.hardware Subject: Request for ASPI4DOS.SYS for Adaptec's 1540 SCSI adapter Message-ID: <726@philica.ica.philips.nl> Date: 1 Jan 91 14:20:49 GMT Reply-To: adrie@.ica.philips.nl () Organization: Philips TDS, Innovation Centre Aachen Lines: 32 I recently bought a SCSI adapter from Tandy. They named it "16 Bit SCSI Host Adapter" and gave it the catalog number 25-4161B. The PCB has a text on it, "AHA1542A", which proves that Tandy bought it from Adaptec and resold it. After installing it in my 286 PC, its BIOS boots with the message Adaptec AHA 1540 BIOS Version 4.05S Copyright 1988 Adaptec, Inc. That makes me believe, that the adapter is the Adaptec 1540. I got one 3.5" diskette with the drivers scsiha.sys and scsitape.sys. I ordered for a Quantum ProDrive LPS105S, which I'm still waiting for. Now, I read in the December BYTE about a special SCSI protocol, with which an application can send SCSI commands to connected targets on the SCSI bus. Adaptec defined it and called it ASPI (Advanced SCSI Programming Interface). There was mentioned a driver `ASPI4DOS.SYS', that could be used under PC-DOS. Does anybody have this driver for the Tandy SCSI Host Adapter or the Adaptec AHA1540? Or should I contact Adaptec (in the Netherlands or Germany)? The Tandy store couldn't help any further, they only resold it. I want to be able to communicate with SCSI devices, e.g. (re)format the hard disk. I'm experienced with the SCSI bus, but not with the Adaptec controllers. I would be much obliged, if somebody could send me the ASPI4DOS.SYS driver, with information about SCSI Request Blocks, etc. Also, pointers to places where I can get it or the phone number of Adaptec in the Netherlands or Germany would be welcome. Please reply via e-mail, as I don't read this newsgroup very often. Adrie Koolen (adrie@ica.philips.nl) Philips Innovation Center Aachen