Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!zephyr.ens.tek.com!tektronix!percy!nosun!techbook!kenh
From: kenh@techbook.com (Ken Haynes)
Newsgroups: comp.sys.novell
Subject: Re: Novell NetWare ELS II
Keywords: HELP!
Message-ID: <1990Dec22.004643.17135@techbook.com>
Date: 22 Dec 90 00:46:43 GMT
References: <16133@chopin.udel.edu>
Organization: TECHbooks of Beaverton Oregon - Public Access Unix
Lines: 18


Try this,  at the colon prompt on the server type track on. That is:
TRACK ON <cr>
Then boot the workstations.  You should see a series of messages come
up on the server screen when IPX and NETx are loaded that say get
nearest server, give nearest server, etc. etc..  IFF you get these
messages, then I would say your cables are OK, and you should start
looking at the IPX and making sure they are configured properly to
the cards.  Otherwise I'd recheck the cables.  Cable diagnostic stuff
is available, some more expensive than others.  GOOD LUCK!

Ken

-- 
******************************************************************************
Network Support Services:

UUCP: {nosun, sequent, tessi} kenh@techbook