Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!julius.cs.uiuc.edu!rpi!ego From: ego@itsgw.rpi.edu (Erik G Olson) Newsgroups: comp.sys.ti Subject: Details on CorComp Rs232 wanted Message-ID: Date: 30 Dec 90 00:24:21 GMT Organization: Rensselaer Polytechnic Institute, Troy NY Lines: 18 Nntp-Posting-Host: jec421.its.rpi.edu I have an extra sidecar CorComp RS232 which I want to use as a base for building hardware. Does anyone have either a schematic for any model of CorComp Rs232, or maybe the disassembled DSR code for it? This would be a tremendous help. If not, I'm off to figure out everything the hard way. My plan is to stick a 6802 microprocessor out there, and connect it via serial i/o, for data, and then add several interrupt line connections to trigger 6802 interrupts. The 6802 would read data from a high-speed data acquisition system's memories-- such as a homemade logic analyzer-- and send it to the 4A's serial port when interrupted. -- =======================+========================================= Erik G Olson "There was virtue in the world before there was orthodoxy in it." ego@pawl.rpi.edu --The Independent Whig