Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!coplex!ezelmo!kenc
From: kenc@ezelmo.UUCP (Ken Cornetet)
Newsgroups: comp.terminals
Subject: Help with Honeywell terminal
Message-ID: <187@ezelmo.UUCP>
Date: 28 Dec 90 04:34:55 GMT
Organization: Cornetet Consulting, Jasper, IN
Lines: 26


Can anyone give me information about a Honeywell terminal I've come
across?  The terminal does not have a model number, but it does have an
"index" number of B01810.  The terminal looks fairly new.  It has a
slide out motherboard and a slide out power supply.  There is a data-set
port, a printer port, and 3 dip switches with 10 switches each.

By setting a switch on back to "test" mode, it displays the configured
baud rate.  I can change this by changing some of the dip switches.  My
first problem is that the terminal appears to be in some sort of "local"
mode.  Everything I type is echoed, but not sent to the serial port. 
There is a push-on, push-off key on the keyboard which causes "local" to
be displayed when it is depressed, but neither position yields any
serial data.  Can anyone tell me how to configure this terminal for
normal operation ?

Also, could someone send a terminfo entry for this beast ?  How about a
phone number for Honeywell ?

Please email to "ken@coplex.uucp", I do not receive this group

Thanks in advance

-- 
Ken Cornetet       (812) 634-2824   |   ken@coplex.uucp    -or-
Rt. 5  Box 184A, Jasper, IN 47546   |   ...!uunet!coplex!ezelmo!kenc