Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!ames!uhccux!bigtuna!pegasus!tleylan
From: tleylan@pegasus.com (Tom Leylan)
Newsgroups: comp.databases
Subject: Re: Help : Clipper
Keywords: clipper
Message-ID: <1991Jan7.101226.19718@pegasus.com>
Date: 7 Jan 91 10:12:26 GMT
References: <19616@netcom.UUCP> <1555@doitcr.doit.sub.org> <1991Jan5.175558.20758@menudo.uh.edu>
Distribution: comp.databases
Organization: Pegasus,  Honolulu
Lines: 24

In article <1991Jan5.175558.20758@menudo.uh.edu> crcc7@menudo.uh.edu (Kim) writes:
>Situation is as follows:
>
>	Problem : Clipper try to open the file LPT2.PRN, instead of initiating
>                  the printer device, when it does the following procedure: 
>
>		SET PRINTER TO LPT2
>                SET CONSOLE OFF
>                SET DEVICE TO PRINT
>                SET PRINT ON
>
>	But if it is compiled under the complex environment, program aborts in
>        error.  Runtime environment is :
>
Kim,

I need to know the error message that results when it is run in the complex
environment with that I should be able to pinpoint the problem.  Contact me
through private mail :   tleylan@pegasus.com

tom leylan
formerly Senior Systems Analyst, Nantucket Corporation

If I can't fix it, it isn't broken...