Path: utzoo!utgpu!watserv1!watmath!att!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!magnus.ircc.ohio-state.edu!tardis.ohio-state.EDU!krumseea
From: krumseea@tardis.ohio-state.EDU (Art Krumsee)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: WinQVT/NET and NDIS
Message-ID: <1991Jan3.173842.7847@magnus.ircc.ohio-state.edu>
Date: 3 Jan 91 17:38:42 GMT
Sender: news@magnus.ircc.ohio-state.edu
Reply-To: krumseea@tardis.ohio-state.EDU (Art Krumsee)
Organization: The Ohio State University (IRCC)
Lines: 14
Nntp-Posting-Host: tardis-gw.ircc.ohio-state.edu

I have been trying to get WinQVT/Net to work with NDIS drivers using FTP
Software's NDIS to Packet Driver conversion driver, DIS_PKT.DOS.  So
far I have had very little luck.  The PKTINT.COM  module loads fine
prior to loading Windows.  But when I run WNQVTNET.EXE I get a string of
error messages.  They are Packet Driver error 11, Packet Driver Error 10,
and finally "Can't Access IP Handle Interface Type 1.  Packet Driver 
Probably not Loaded."

Has anyone else tried this?  Is there anything obvious I might be doing
wrong or is there a reason why this won't work?

Art Krumsee
art.krumsee@osu.edu
Ohio State University