Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!rpi!bu.edu!att!pacbell.com!ucsd!ucbvax!FTP.COM!fks
From: fks@FTP.COM (Frances Selkirk)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re:  WinQVT/NET and NDIS
Message-ID: <9101041615.AA15589@ftp.com>
Date: 4 Jan 91 16:15:44 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 20


	
>I have been trying to get WinQVT/Net to work with NDIS drivers using FTP
>Software's NDIS to Packet Driver conversion driver, DIS_PKT.DOS.  So
>far I have had very little luck.  The PKTINT.COM  module loads fine
>prior to loading Windows.  But when I run WNQVTNET.EXE I get a string of
>error messages.  They are Packet Driver error 11, Packet Driver Error 10,
>and finally "Can't Access IP Handle Interface Type 1.  Packet Driver 
>Probably not Loaded."

If WinQVT/Net cannot find the DIS_PKT.DOS from Windows, you should try 
loading it first, and then loading Windows. This is more likely to work,
and, if it does, will provide you with a more flexible configuration. 


	
	

Frances Kirk Selkirk		 info@ftp.com	           (617) 246-0900
FTP Software, Inc.		 26 Princess Street, Wakefield, MA  01880