Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!elroy.jpl.nasa.gov!zardoz.cpd.com!tmiuv0!rick
From: rick@tmiuv0.uucp
Newsgroups: comp.sys.amiga
Subject: Re: UUCP Summary
Message-ID: <1150@tmiuv0.uucp>
Date: 2 Jan 91 16:07:11 GMT
References: <6535@crash.cts.com>
Organization: Technology Marketing Inc., Irvine, CA
Lines: 25

In article <6535@crash.cts.com>, danb20@pro-graphics.cts.com (Dan Bachmann, SubOp) writes:
>         We seem to be able to get UUCP to work fine except when a normal 2400
> baud modem calls a Hayes 9600 baud. (The 9600 can call the 2400 no problem).
>         Do you have any idea how to fix this? Niether of us have 68030s, just
> 68000s.

Well, I'm running Dillon's UUCP 1.06 on my 2500/30 on both the 68000 and the
68030 (a 30MB Seagate ST-138N and a 200MB Conner CP3200 on a HardFrame).  I
use both a Supra 2400 baud external modem and a Telebit T1000 with no problems
either way.  It also runs a direct line to XyClone (my 386 Unix box) at 19,200
with nary a glitch.  It's a happy camper no matter what I do.  Of course, I have
7MB of RAM and run a ridiculously high stack (like 50KB), but it still doesn't
glitch, even with lower stack sizes.

Note that the Telebit and the direct line are running off of an ASDG Dual
Serial Board (DSB), since the Amiga's serial port isn't reliable at or above
9,600 baud.  Ah, well.
----------------------------------------------------------------------------
[- O] Rick Stevens
  ?   EMail: uunet!zardoz!tmiuv0!rick -or- uunet!zardoz!xyclone!sysop
  V   CIS: 75006,1355 (75006.1355@compuserve.com from Internet)

"I'm tellin' ya, Valiant!  Da whole ting stinks like yesterday's diapers!"
                                - Baby Herman in "Who Framed Roger Rabbit"
----------------------------------------------------------------------------