Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!evax!utacfd!letni!dms3b1!caleb!jdp
From: jdp@caleb.UUCP (Jim Pritchett)
Newsgroups: comp.sys.amiga.hardware
Subject: A2090 external connector
Message-ID: <2183.AA2183@caleb>
Date: 4 Jan 91 05:22:38 GMT
Followup-To: comp.sys.amiga.hardware
Organization: is sometimes desirable
Lines: 23
Expires:
Keywords:
Distribution:

[]

I want to move my internal SCSI drives to an external box.  Currently,
they are connected via the 50 pin rectangular connector on the A2090.
The external connector is a 25 pin Mac (bleech) type connector.  Can
I simply make a cable that reroutes the pin numbers appropriately?  Do
I just make all the "ground" pins connect to the same ground?

Also, what is TPWR on the external connector?  Is this a supplied voltage
to power the drive?

                           Thanks,



--

                                                Jim Pritchett


UUCP:  texsun.central.sun.com!letni!rwsys!caleb!jdp
 or    spudge.lonestar.org!caleb!jdp
 or    letni.lonestar.org!dms3b1!caleb!jdp