Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!att!tut.cis.ohio-state.edu!cica!news.cs.indiana.edu!nstn.ns.ca!cs.dal.ca!ug.cs.dal.ca!may From: may@ug.cs.dal.ca (Bear) Newsgroups: comp.sys.amiga.hardware Subject: Amiga 500 Upgrades or Bug fixes???? Message-ID: <1991Jan7.131357.3642@cs.dal.ca> Date: 7 Jan 91 13:13:57 GMT Sender: news@cs.dal.ca (USENET News) Distribution: na Organization: Math, Stats & CS, Dalhousie University, Halifax, NS, Canada Lines: 24 Originator: may@ug.cs.dal.ca Nntp-Posting-Host: ug.cs.dal.ca Here is a question that I hope you tech. people can help me out with.... I have purchased a 2MB supra ram card to go into my AMIGA 500 Supra SCSI interface. Upon installing and testing I come out with all kinds of errors when I test the memory for bad chips. I of course had the board replaced thinking it was a bad board. I got another one and the same problem occured with this one, BUT on a friends NEWER Amiga 500 (my is about 2 years old) the entire thing worked just fine. So I removed the 2MB board and tried the interface with my HD again and all works well again. My questions is there a design difference in the Amiga 500's or any type of bug fixes? I had Version 1.3 installed into my older 500 so I could auto boot is there anything else I need? any help would be greatly appreciated......... ** __ *********************************************************************** / ) |IN%"may@ug.cs.dal.ca"| /--< _ __. __ |---------------------| /___/_