Xref: utzoo comp.sys.amiga:75995 comp.sys.amiga.tech:17575
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!metro!otc!siri
From: siri@otc.otca.oz (Siri Hewa)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: dnet dprint ?
Message-ID: <2141@otc.otca.oz>
Date: 7 Jan 91 22:38:04 GMT
References: <90352.102816JFS10@psuvm.psu.edu>
Reply-To: siri@otc.UUCP (Siri Hewa)
Organization: OTC Development Unit, Australia
Lines: 21

In article <90352.102816JFS10@psuvm.psu.edu> JFS10@psuvm.psu.edu (Jonathan Swaby) writes:
>
> I have been trying to use dprint and dsoc 8198 on a SUN SparcServer 1+ running
> SUNos 4.1 . Everything is working correctly, but I get a permission denied
> message when I try the above commands. I have changed the dnet.config file
> on the amiga side to set all access to the lowest security level, but I still
> get the message. Can anyone help me? Does anyone have dprint working. I am
> calling the SUN from the amiga, rather than using the SUN to call the amiga.
>
> Jonathan Swaby     JFS10@PSUVM
>                    jfs10@psuvm.psu.edu

 Please check that,  1.Are you using the same access and pass word for both
 machine.
		     2.On SUN side also check access configuration.
		     3 Check display path. (Should be rootless).
		     4.Check Remote command.

		     Siri Hewa.
		     ||||OTC||
		     R&D Visual Communications.