Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!i2unix!inria!laas!ralph From: ralph@laas.fr (Ralph P. Sobek) Newsgroups: comp.sys.atari.st.tech Subject: Re: MTools Message-ID: Date: 2 Jan 91 10:51:05 GMT References: <2887@laura.UUCP> <2890@laura.UUCP> Sender: news@laas.laas.fr Distribution: comp Organization: LAAS-CNRS France Lines: 21 In-reply-to: klute@tommy.informatik.uni-dortmund.de's message of 27 Dec 90 09:40:44 GMT In article <2890@laura.UUCP> klute@tommy.informatik.uni-dortmund.de (Rainer Klute) writes: | | In article , | ridderbusch.pad@nixdorf.com (Frank Ridderbusch, PXD-S4) writes: | |> I am also using Mtools on my local un*x box and had the same problems | |> that you mention (My Mtools was an older version, not 2.0). I have posted an ST compatible patch to one of the newsgroups which redid the DEFINE and also patched the volume name for Gulam! By the way, where is Mtools 2.0 available for FTP? P.S. PC's also have trouble with the single FAT: it depends upon which application you use. -- Ralph P. Sobek Disclaimer: The above ruminations are my own. ralph@laas.fr Addresses are ordered by importance. ralph@laas.uucp, or ...!uunet!laas!ralph If all else fails, try: sobek@eclair.Berkeley.EDU =============================================================================== Proud new owner of a Mega 4 ST. What should I do with my *small* SH204 drive?