Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!julius.cs.uiuc.edu!news.cs.indiana.edu!msi.umn.edu!noc.MR.NET!gacvx2.gac.edu!hhdist
From: postmaster.DUNG_BEETLE@gateway.qm.apple.com (postmaster)
Newsgroups: comp.sys.handhelds
Subject: Steve Winters :Unknown QM u
Message-ID: <9101040906.AA19970@internal.apple.com>
Date: 4 Jan 91 07:09:52 GMT
Lines: 49
To: handhelds@gac.edu
Return-path: <postmaster.DUNG_BEETLE@gateway.qm.apple.com>
To: handhelds@gac.edu

Mail*Link#170#                    Steve Winters :Unknown QM u
Received: by gateway.qm.apple.com; 4 Jan 91 01:09:49
Received: from apple.com by goofy.apple.com with SMTP (5.61/25-eef)
	id AA19813; Fri, 4 Jan 91 01:04:57 -0800
	for Steve_Winters.PERIPH_PROJ@gateway.qm.apple.com
Received: from gacvx2.gac.edu by apple.com with SMTP (5.61/25-eef)
	id AA02308; Fri, 21 Dec 90 17:56:26 -0800
	for Steve_Winters.PERIPH_PROJ@gateway.qm.apple.com
Date: Fri, 21 Dec 1990 19:22 CST
From: handhelds@gac.edu
Subject: Re: GATEWAY-48 codelock program testing
Sender: NEWSMGR@gacvx2.gac.edu
To: HANDHELDS@gacvx2.gac.edu
Errors-To: postmaster@gac.edu
Reply-To: handhelds@gac.edu
Message-Id: <819B1E9E60001025@gacvx2.gac.edu>
X-Vms-To: IN%"HANDHELDS@GACVX2.GAC.EDU"
Comments: Forwarded from COMP.SYS.HANDHELDS by GACVX2.GAC.EDU

Relay-Version: VMS News - V6.0-1 14/11/90 VAX/VMS V5.4; site gacvx2.gac.edu
Path:
gacvx2.gac.edu!noc.MR.NET!msi.umn.edu!src.honeywell.com!uwm.edu!rpi!zaphod.mps.ohio-state.edu!van-bc!ubc-cs!fs1!ee.ubc.ca!jmorriso
Newsgroups: comp.sys.handhelds
Subject: Re: GATEWAY-48 codelock program testing
Message-ID: <1990Dec21.152316@ee.ubc.ca>
From: jmorriso@ee.ubc.ca (John Paul Morrison)
Date: 21 Dec 90 23:23:16 GMT
Reply-To: jmorriso@ee.ubc.ca
Sender: root@fs1.ee.ubc.ca
References: <9012121533.AA06857@cd.chalmers.se>
Organization: UBC Electical Engineering
Lines: 17

In article <9012121533.AA06857@cd.chalmers.se>, erikmb@cd.chalmers.se
(Erik Bryntse) writes:

> 
> - Security. There are only two ways to start the calculator when
> GATEWAY-48 is enabled. Either you key in the correct 4-digit code,
> or you take out the batteries and wait until the calculator memory
> is empty!
.. 
> Erik Bryntse / SHPRF
> 
> erikmb@cd.chalmers.se


Or maybe taking out the top left(from the back) HP48 rubber foot, and
sticking a pin in the 
hole to do a "hard" reset.