Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!think.com!paperboy!yee From: yee@osf.org (Michael K. Yee) Newsgroups: comp.sys.mac.comm Subject: ZTerm, Telebit T1000, and flow control Message-ID: Date: 3 Jan 91 16:05:26 GMT Sender: news@OSF.ORG Distribution: comp Organization: Open Software Foundation Lines: 17 Using the combination above, what is the best/fastest setup for flow control? Currently I use the MNP/Enhanced mode on the Telebit @ 9600 baud. I set flow control to XON and XOFF. The question is - Can I use hardware flow control (there are two levels on available on the Telebit)? Or since the MNP/Fast connection is suppose to be error free, should I just turn off flow control? Thanks in advance, =Mike -- = Michael K. Yee -- yee@osf.org or uunet!osf.org!yee -- = OSF/Motif Development = "I can't give you brains, but I can give you a diploma." -- The Wizard of OZ