Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!clyde.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!bu.edu!rpi!julius.cs.uiuc.edu!usc!samsung!spool2.mu.edu!uunet!mcsun!cernvax!chx400!bernina!czychi
From: czychi@bernina.ethz.ch (Gary Czychi)
Newsgroups: comp.sys.mac.programmer
Subject: Power Supply for Classic configurable for 110/220 volts??
Message-ID: <1991Jan3.102238.829@bernina.ethz.ch>
Date: 3 Jan 91 10:22:38 GMT
Reply-To: czychi@bernina.UUCP (Gary Czychi)
Organization: Swiss Federal Institute of Technology (ETH), Zuerich
Lines: 32


   Hi,

   when I opened a Mac Classic lately, I found on the cover of the
analog board two checkboxes with the following text:

	|_| 120V: Jumper JP1 in Place

	|x| 240V: No Jumper JP1

   Because this Classic was bought in Europe, it is configured for 240
volts and therefore the second line was checked.

   And here comes my question:
   There are said two be two entirely different power supplies for the
Classic, one for 110V and the other for 240V. Is this really true or
is there just one power supply which you can configure yourself for the
correct voltage?


Thank you very much for any help.


Gary


    Gary T. Czychi                University of St.Gallen, Switzerland

    czychi@csghsg52.BITNET  or  czychi@alpha.unisg.ch (preferred host)
            czychi@bernina.ethz.ch.UUCP   (CZYCHI@ETHZ.uucp)
		      Tel.: --41 / 71 / 57 17 22
                                   -