Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!uunet!mcsun!hp4nl!svin02!debra
From: debra@svin02.info.win.tue.nl (Paul de Bra)
Newsgroups: comp.unix.sysv386
Subject: Re: internal Telebit, SCO Unix 3.2, 80 bytes/sec???
Message-ID: <1660@svin02.info.win.tue.nl>
Date: 3 Jan 91 16:18:36 GMT
References: <24558@dime.cs.umass.edu>
Organization: Eindhoven University of Technology, The Netherlands
Lines: 17

In article <24558@dime.cs.umass.edu> williams@cs.umass.edu writes:
>...[description of juggling with com ports deleted]
>uutry
>reports CONNECT FAST, but the xferstats shows that I'm only getting
>76 bytes per second on large transfers!

I have seen a similar problem when I had a board with a COM1 and
not a COM2 (no second chip) and another board with a COM2 and COM3.
The COM2 didn't work right because of the presence of the non-existent
COM2 on the other board. I changed it to COM4 and all went well.

It sounds like you have an interrupt or address conflict causing
you system not to react properly to incoming characters.
(btw i was using FAS 2.07)

Paul.
(debra@research.att.com, debra@win.tue.nl)