Path: utzoo!utgpu!cunews!micor!latour!atronx!rwm
From: rwm@atronx.OCUnix.On.Ca (Russell McOrmond)
Newsgroups: comp.sys.amiga.datacomm
Subject: Re: TCP/IP SLIP with EtherNet/serial for Amiga ?
Message-ID: <56916.663670980@atronx.OCUnix.On.Ca>
Date: Sat Jan 12 03:03:00 1991
Followup-To: comp.sys.amiga.datacomm
In-Reply-To: horke@buchonia.rhoen.in-berlin.de (Bernhard Kroenung)

In a message posted on 10 Jan 91 13:09:44 GMT,
horke@buchonia.rhoen.in-berlin.de (Bernhard Kroenung) wrote:
BK>Has anybody Information about TCP/IP-Software for Amiga (PD or commercial) ?
BK>Which Ethernet-Cards are available (Commodore ???) - Has somebody Infos 
BK>about PD-Slip Software ??

A small thread about possible SLIP drivers/etc was started just a bit ago. Michael
Richardson (mcr@sandalman.ocunix.on.ca) is going to be setting up a mailing list
of interested developers in hopes that more software can be made available.

  Other than a bit of a blurb in the Devcon notes, I have not seen much about 
SANA (Standard Amiga Networking Archetecture). I would obviously like to make 
anything that I write compatable with this software so that pieces can be
interchanged (A SMTP port that I write, I would like the people using the C=
Ethernet cards to be able to use, etc...)

  SLIP, TELNET, FTP and NFS are all currently bundled into this single program
written for use with packet radio's called KA9Q - MCR has this working between his
Amiga and his Sun, and the possibilities of separating this into a proper SANA
protocol stack look like a good place to start.

BK>Bernhard Kroenung, Bahnhofstr. 8, D-W6408 Ebersburg/Rhoen, Germany +49 6656 386
BK>horke@buchonia.rhoen.in-berlin.de sysop@fulmin.zer.sub.org Kronung@DGIHRZ01.BIT

Please forward any info you receive on.

Thanks.

---
  Opinions expressed in this message are my Own.  My Employer does not even
know what these networks ARE.

  Russell McOrmond   rwm@Atronx.OCUnix.On.Ca   {tigris,alzabo,...}!atronx!rwm 
  FidoNet 1:163/109  Net Support: (613) 230-2282
  Amiga-Fidonet Support  1:1/109