Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!zaphod.mps.ohio-state.edu!usc!rutgers!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Epson Printer problem
Message-ID: <703@cbmger.UUCP>
Date: 9 Jan 91 08:11:14 GMT
References: <1991Jan8.103115.17498@athena.mit.edu> <187dab1f.ARN2577@starsoft.UUCP>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 12

In article <187dab1f.ARN2577@starsoft.UUCP> david@starsoft.UUCP writes:
>
>At Offset 0x95, you will find the hex value 1E. This is the drivers timeout
>value (30 seconds). It is actually a word, starting hex 1B, with a
>value of 0x0000001E.

A little bit of nit picking: It really is a word, not a longword,
so it is TWO bytes, starting at offset $94, reading $001E.

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk