Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!julius.cs.uiuc.edu!rpi!peck
From: peck@ral.rpi.edu (Joseph Peck)
Newsgroups: comp.sys.amiga.hardware
Subject: Old Koala Pad
Summary: Anyone have the specs on it?
Message-ID: <!KY^+F%@rpi.edu>
Date: 9 Jan 91 19:53:26 GMT
Sender: peck@ral.rpi.edu
Organization: Rensselaer Polytechnic Institute, Troy NY
Lines: 20
Nntp-Posting-Host: ral.rpi.edu

Does anyone have the pin-out specifications for a Koala Pad?
It is a pressure sensitive drawing pad made for the old
Atari computers.  It was made by Koala Technologies Corp, and
is model #004.  Before anyone tells me that it has awful resoltion
and that I should buy something better for my amiga, this is 
free and sitting in my lap at the moment....

But if you did know its resolution I wouldn't complain if you 
told me. :)

My primary interest in hooking this up is to provide an easy
to use drawing medium for 2 to 3 year olds.....  and if the
resolution isn't too awful, for doing some of my own drawings...

Oh yeah, one last detail.  It has a standard 9 pin joystick
connector.

Thanks for your help,
Joe Peck
peck@ral.rpi.edu