Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!cs.utexas.edu!sdd.hp.com!usc!rutgers!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.tech
Subject: Re: SyQuest corruption! [was Re: HD Errors]
Message-ID: <705@cbmger.UUCP>
Date: 9 Jan 91 09:31:42 GMT
References: <140293@pyramid.pyramid.com>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 17

In article <140293@pyramid.pyramid.com> telam@pyrps5.pyramid.com (Thomas Elam) writes:
>Then does this mean, for example, that Commodore's A2091 would work
>fine with a Syquest drive and that after each insertion, I would just
>type "diskchange"?  Wouldn't this cause problems if the system asked
>for a particular disk volume (via a standard requestor), and accessed
>the disk as soon as I put it in?

You HAVE to provide the volume name as parameter for Diskchange.
More precise: I believe it needs the physical name (e.g. df0:),
not the name you can give with the Relabel command.
It works with every Amiga device. I have used this when I tinkered
with my corrupted HD and wanted to force a validation. Diskchange
did that.

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk