Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!wuarchive!sdd.hp.com!hplabs!otter.hpl.hp.com!hpopd!bijal
From: bijal@hpopd.pwd.hp.com (Bijal Shah)
Newsgroups: comp.sys.hp
Subject: Re: installation woes
Message-ID: <61160001@hpopd.pwd.hp.com>
Date: 14 Jan 91 10:06:28 GMT
References: <1991Jan10.141645@axion.bt.co.uk>
Organization: Hewlett-Packard CCG-PWD, UK.
Lines: 15




	You should use your dfile.full.lan to build yourself a new kernal,
	to start with.  Next check out /etc/rc, see what scripts it calls,
	and make sure that you want them called and that they are there.
	You may need to get them from /etc/newconfig if they do not exist.
	Also, make sure that you have an Internet Id number if you are
	connecting the machine to the net.  I don't know where to get them,
	but someone at HP might be able to tell you.  That is as much as I
	know.  The installation tapes have all the required filesets at hand,
	so the problems you will have now are in configuration.

					Regards,
						Bijal