Path: utzoo!censor!geac!torsqnt!hybrid!scifi!bywater!uunet!gsm001!gsm From: gsm@gsm001.uucp (Geoffrey S. Mendelson) Newsgroups: comp.sys.mac.misc Subject: Re: Wanted: Program to read 3.5" IBM floppies Message-ID: <1991Jan9.033406.4838@gsm001.uucp> Date: 9 Jan 91 03:34:06 GMT References: <347.27898bfc@zodiac.rutgers.edu> Organization: Geoffrey S. Mendelson -- Software Consulting Lines: 44 garrison@zodiac.rutgers.edu asks: >Are there and programs available that enable one to read a 3.5" IBM formatted >disk? (Or anything for the IBM that can read a Macintosh disk)? On a MAC with a SUPERDRIVE (1.4M floppy drive), found on a Mac II (most models except the II itself) later SE, SE/30's and Classics you can read MS dos disks with the a program supplied with the system. I think it is called "Apple File Exchange". The program works either with no conversion (binary) or conversion of a variant of DCA to a MAC word processor (I've only used binary conversion). SE's and II's without one can be upgraded. Pluses and earlier MACs cannot. I use it often on my MAC Classic. ***HINT*** Files moved using "Apple File Exchange" need to have their type and creator changed before most programs will read the files. For STUFFIT to recognize the files the creator and type must both be changed to "SIT!" (caps required, quotes for illustation and should not be used. On the PC, the people who make COPY II, make a "COPY II OPTION BOARD" for the PC. It goes in an eight-bit slot and and connects between the floppy controler and the first drive. The board comes with software to read and write MAC floppies. Mine is on a "generic" 286 clone and works fine. >Thanks, >Karl You are welcome. P.s. When all else fails a null modem and two communication programs works fine. -- ---------------------------------------------------------------------------- | Geoffrey S. Mendelson | Computer Software Consulting | Dr. | | (215) 242-8712 | IBM Mainframes, Unix, PCs, Macs | Who | | uunet!gsm001!gsm | | Fan too!|