Xref: utzoo comp.unix.sysv386:3962 comp.terminals:2509
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!rpi!masscomp!peora!tarpit!bilver!bill
From: bill@bilver.uucp (Bill Vermillion)
Newsgroups: comp.unix.sysv386,comp.terminals
Subject: Re: escape sequences for AT386
Message-ID: <1991Jan11.172957.25919@bilver.uucp>
Date: 11 Jan 91 17:29:57 GMT
References: <1991Jan9.174613.10175@news.larc.nasa.gov>
Distribution: na
Organization: W. J. Vermillion - Winter Park, FL
Lines: 45

In article <1991Jan9.174613.10175@news.larc.nasa.gov> jka@radar0.larc.nasa.gov (J. Keith Alston) writes:
>
>  Hello,
>     I am attempting to modify the AT386 termcap (and/or terminfo) file
>     to include:

I have found there appear to be some differences on the AT386
termcaps depeding on vendors.

But this works on Esix with an application package which need
these.

>	  1)  the escape sequence for entering graphics mode.
	ESC [ 12 m

>	  2) the escape sequence for leaving graphics mode.
	ESC [ 10 m

>	  3) the ASCII equivalents for the following graphics
>	     characters needed to draw a box:
 
>		 upper left corner
		332

>		 lower left corner
		300/Path

>		 upper right corner
		077   <- this was the one that didn't work as 
			supplied.  It should have been in the octal
			300 range - maybe app problem, driver prob,
			??? - but this works on mine.

>		 lower right corner
		300

>		 horizontal lines
		084   <- another oddly placed one.
		
>		 vertical lines
		263

-- 
Bill Vermillion - UUCP: uunet!tarpit!bilver!bill
                      : bill@bilver.UUCP