Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!yale!umich!ox.com!emv
From: abe@mace.cc.purdue.edu (Vic Abell)
Newsgroups: comp.archives
Subject: [next] Re: Drive parameters for Fujitsu M2263SA
Message-ID: <1991Jan19.072301.14164@ox.com>
Date: 19 Jan 91 07:23:01 GMT
References: <1991Jan18.065527.28368@agate.berkeley.edu> <6621@mace.cc.purdue.edu>
Sender: emv@ox.com (Edward Vielmetti)
Reply-To: abe@mace.cc.purdue.edu (Vic Abell)
Followup-To: comp.sys.next
Organization: Purdue University
Lines: 26
Approved: emv@ox.com (Edward Vielmetti)
X-Original-Newsgroups: comp.sys.next

Archive-name: hardware/scsi/next-disk-lore/1991-01-18
Archive: sonata.cc.purdue.edu:/pub/next/lore/disks.Z [128.210.15.30]
Original-posting-by: abe@mace.cc.purdue.edu (Vic Abell)
Original-subject: Re: Drive parameters for Fujitsu M2263SA
Reposted-by: emv@ox.com (Edward Vielmetti)

In article <1991Jan18.065527.28368@agate.berkeley.edu> jeff@soda.Berkeley.EDU (Jeff Louie) writes:
>
>Has anyone gotten a Fujitsu M2263SA (a 778MB drive) configured to boot off
>of the Next?  I have been able to get it formatted and 'built', but for
>some reason when I attempt to boot off using the drive, ROM Monitor
>comes back with the following error:
>
>	sc: unexpected msg
>	SCSI: Unexpected Msg:1

I've replied to Jeff directly, but it's probably worth re-broadcasting
that there is an excellent digest available via anonymous ftp from
sonata.cc.purdue.edu (128.210.15.30) that discusses installing third
party disks.  The articles in

	pub/next/lore/disks.Z

directly address the jumper settings that are required on a Fujitsu
M2263S to solve the above problem.  I found that the same jumper settings
were needed to enable a Fujitsu M2266S.