Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!portal!cup.portal.com!cec
From: cec@cup.portal.com (Cerafin E Castillo)
Newsgroups: comp.dcom.modems
Subject: Re: T2500 V.32 from UDS V.32
Message-ID: <38157@cup.portal.com>
Date: 18 Jan 91 01:28:00 GMT
References: <54550@mcdchg.chg.mcd.mot.com>
Distribution: na
Organization: The Portal System (TM)
Lines: 20

The S95=2, S96=1, S97=1, S98=3, S106=1 settings might be confusing your
UDS V.32 modems.  If these other V.32 modems are not specifying MNP/V.42
error correction or data compression ONLY, then they may not connect
to your T2500.  The incoming UDS V.32 modems should be set to FORCE
MNP 4/5, if MNP is desired OR V.42/V.42bis if it is desired; BUT NOT BOTH!
If the UDS V.32 modems are being confused due to their lack of V.42/V.42bis
or MNP 4/5, then your only remedy might be to turn these features OFF
in your modem.  This would be a real bummer for a host modem.  Good Luck!

===============================================================================
Cerafin E. Castillo                       ||      //\\  ||\\  ||
Network Consultant                        ||     //__\\ || \\ ||  Los Altos
Los Altos Networks                        ||    // ---\\||  \\||  Networks
340 Second St. #6                         ||___//      \ |   \ |
Los Altos, CA  94022
(415) 941-8031      UUCP:     {apple,sun,uunet}!portal!cup.portal.com!cec
                INTERNET:     cec@cup.portal.com

                      "...No hay mal que por bien no venga..."
===============================================================================