Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!samsung!usc!sdd.hp.com!zaphod.mps.ohio-state.edu!casbah.acns.nwu.edu!accuvax.nwu.edu!nucsrl!telecom-request From: jon_sree@world.std.com (Jon Sreekanth) Newsgroups: comp.dcom.telecom Subject: Re: DTMF in Japan Message-ID: <16196@accuvax.nwu.edu> Date: 19 Jan 91 16:21:39 GMT Sender: news@accuvax.nwu.edu Organization: TELECOM Digest Lines: 32 Approved: Telecom@eecs.nwu.edu X-Submissions-To: telecom@eecs.nwu.edu X-Administrivia-To: telecom-request@eecs.nwu.edu X-Telecom-Digest: Volume 11, Issue 49, Message 6 of 11 In article <16153@accuvax.nwu.edu> news@accuvax.nwu.edu (USENET News System) writes: > In a recent message, John Higdon mentions the relative lack of DTMF in > Japan. Having been telephonically bouncing around Tokyo on and off I guess I started this thread some time ago, by asking why answering machines and voice mail services could not work by detecting pulse inputs. One of the responses was that the receiving phone does not see line current interruptions, just clicks. I knew this, but as I mentioned, one AT & T answering machine claimed to work with non-DTMF phones. Well, I finally investigated. The AT&T Answering System Telephone 1523 says on the box that remote operation is possible from pulse phones. This is technically correct, but somewhat misleading, because the user manual (which I read in the store) describes the operation: if after some time out period, you haven't entered your DTMF password, the answering machine starts prompting you by voice, and you respond _by speaking_. The manual says it does not do any speech recognition, just responds to audio energy. To enter your two digit password, you let it step through announcing digits, and when you hear the first digit, you say any random word, and then it steps through for the second digit. It's as easy as pulling teeth. Regards, Jon Sreekanth Assabet Valley Microsystems Fax and PC products 346 Lincoln St #722, Marlboro, MA 01752 508-562-0722 jon_sree@world.std.com