Xref: utzoo comp.sys.ibm.pc.hardware:4690 comp.misc:11189 comp.unix.misc:845 comp.unix.sysv386:4217
Newsgroups: comp.sys.ibm.pc.hardware,comp.misc,comp.unix.misc,comp.unix.sysv386
Path: utzoo!telly!problem!skypod!scott
From: scott@skypod.uucp (Scott Campbell)
Subject: Re: 386-33 Motherboard
Message-ID: <1991Jan20.164336.16358@skypod.uucp>
Organization: Skypod Communications Inc., Toronto, Ontario
References: <1991Jan17.215221.20223@skypod.uucp> <1991Jan18.193434.12891@watserv1.waterloo.edu>
Date: Sun, 20 Jan 91 16:43:36 GMT

In article <1991Jan18.193434.12891@watserv1.waterloo.edu> jching@watnow.waterloo.edu (John Y. Ching) writes:
>I am in the process of selecting a 386-33 clone.  I have the following
>questions about the motherboard design of various venders:
>2)  If I buy a 386-33 with a motherboard that has 16 MB (maximum) on board
>    but does NOT have a 32-bit slot for additional memory upgrade, am I
>    limiting my upgrade path too much?  Is there any real need for more
>    than 16 MB for a 80386-based machine, ever?
>

Not if all you are going to do is run DOS... certainly if you plan on
running UNIX or OS/2, you will be able to use more than 16 megs... the more
the merrier... 

With 4 Meg chips available now and 64M chips "right around the corner", I
think we are about to enter a new age in memory availabilty...

Wow.. and to think that my good ol' Trash-80 came with 4 (count 'em) K and
was upgradable to (oooooohh!) 48K :-)

Of course with DOS, 16 Megs becomes 640K conventional memory and a 15.5M
ramdisk :-))))

scott
-- 
Scott J.M. Campbell                                        scott@skypod.uucp
Skypod Communications Inc.                      ..!uunet!scocan!skypod!scott 
57 Charles St. West, #1310            ..!uunet!utai!lsuc!becker!skypod!scott
Toronto, Ont. (416) 961-3847          ..!epas.utoronto.ca!nyama!skypod!scott