Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!unido!fauern!lan!rommel
From: rommel@lan.informatik.tu-muenchen.dbp.de (Kai-Uwe Rommel)
Newsgroups: comp.os.os2.misc
Subject: 8514/A & ISA-Bus (again)
Message-ID: <6693@tuminfo1.lan.informatik.tu-muenchen.dbp.de>
Date: 18 Jan 91 17:16:16 GMT
References: <6578@tuminfo1.lan.informatik.tu-muenchen.dbp.de> <150@segpc.UUCP>
Sender: news@lan.informatik.tu-muenchen.dbp.de
Reply-To: rommel@lan.informatik.tu-muenchen.dbp.de (Kai-Uwe Rommel)
Organization: Inst. fuer Informatik, TU Muenchen, Germany
Lines: 20

I forgot to mention in my first article, that I have the WD instructions
for OS/2 for the 8514/A Plus and that I followed them carefully but the
card/driver doesn't work (although it works under DOS&Windows).
I have the memory upgrade installed and use IBM OS/2 1.2.
I have already tried to remove all additional hardware (modem card,
hercules mono card, tape adapter) but nothing solved the problem.

After installing all DLL's and SETtings in CONFIG.SYS, when I reboot,
the machine hangs just before it should display the PM screen the first
time. Currently, I have no idea what could be wrong, therefore I was
asking ...


Kai Uwe Rommel

--
/* Kai Uwe Rommel, Munich ----- rommel@lan.informatik.tu-muenchen.dbp.de */

DOS ... is still a real mode only non-reentrant interrupt
handler, and always will be.                -Russell Williams (MS)