Path: utzoo!censor!geac!torsqnt!lethe!yunexus!ists!helios.physics.utoronto.ca!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!unido!ira.uka.de!fauern!lan!rommel From: rommel@lan.informatik.tu-muenchen.dbp.de (Kai-Uwe Rommel) Newsgroups: comp.os.os2.misc Subject: 8514/A & ISA-Bus (solved) Message-ID: <6712@tuminfo1.lan.informatik.tu-muenchen.dbp.de> Date: 19 Jan 91 21:14:17 GMT Sender: news@lan.informatik.tu-muenchen.dbp.de Reply-To: rommel@lan.informatik.tu-muenchen.dbp.de (Kai-Uwe Rommel) Organization: Inst. fuer Informatik, TU Muenchen, Germany Lines: 34 The reason for the reported problems was the display I used. It was a gray-shade multisync display (TVM MG-11) because my new display is already ordered but I do not yet have it. Although the MG-11 is capable of 1024x768 interlaced, it seems that it has wrong ID bits set which prevent the OS/2 driver from working. I have now borrowed an Eizo/Nanao 9080i display (the same which I will get soon) and the Paradise 8514/A now works (noninterlaced, 70Hz, of course, it's really fine). I have also patched the ibm8514.dll for 32x32 icons instead of 64x64 icons which are far too big for a 16" display. But I have two questions now: 1. The VioGetConfig() call now returns the values 7 for the video card type and 9 for the display type but only values of up to 4 for the video card and 5 for the display are documented. Does anyone know what all the other values mean ? 2. Is it correct that CodeView cannot display the debug screen on the VGA (with a second multisync display) while running the debugged program on the 8514/A ? Do I still have to debug with a mono card and a TTL display (which still works) ? The CodeView for Windows *can* debug with 8514 & VGA with the option /8 and I would like to know if this is possible under OS/2 too. Thanks in advance, Kai Uwe Rommel -- /* Kai Uwe Rommel, Munich ----- rommel@lan.informatik.tu-muenchen.dbp.de */ DOS ... is still a real mode only non-reentrant interrupt handler, and always will be. -Russell Williams (MS)