Path: utzoo!utgpu!cunews!bnrgate!uunet!mcsun!ukc!mucs!cns!usenet From: vanaards%t7@uk.ac.man.cs Newsgroups: eunet.micro.acorn,comp.sys.acorn Subject: Installing Hard Disks Summary: Will this H/d work Keywords: Hitachi Hard Disk Message-ID: <1991Jan18.151427.23894@cns.umist.ac.uk> Date: 18 Jan 91 15:14:27 GMT Sender: usenet@cns.umist.ac.uk (News System) Organization: Department of Computer Science, University of Manchester UK Lines: 32 I've got an old 5 1/4" 13MB (10MB) Hard disk drive, taken from an old Sharp MZ5600-A. Does anyone know whether or not it is possible for this drive to be used in the Archimedes - I have a SCSI i/f and the ST506 i/f. The Drive has a make code DK503. Secondly, what drives can I use with the Archimedes. When looking down lists of Hard disks in the PCW, you generally see ST numbers, and possibly type of drive such as RLL,SCSI,IDE, etc, how do I know which will work with the Archimedes - I've only seen one ST506 ! That leads onto my final question about Hard Disks, what makes an RLL drive different from a SCSI drive - in terms of internal Hardware ? I have previously assumed that the RLL has an interface which compresses the data going to the disk, and this i/f sits as a front end to the standard drive i/f which actually does the controlling of the heads. +--------------------------------+-----------------------------------------+ | ()()TEVEN () | | | () ()() | | | ()() () ()AN () () | | | () ()() ()()()() +-----------------------------------------+ | ()() () () ()ARDT |JANET E-mail : vanaards@uk.ac.man.cs.p4 | +--------------------------------+-----------------------------------------+ +--------------------------------+-----------------------------------------+ | ()()TEVEN () | | | () ()() | | | ()() () ()AN () () | | | () ()() ()()()() +-----------------------------------------+ | ()() () () ()ARDT |JANET E-mail : vanaards@uk.ac.man.cs.p4 | +--------------------------------+-----------------------------------------+